desig.h

Go to the documentation of this file.

/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2012 Karl Palsson <karlp@tweak.net.au>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */
 
#ifndef LIBOPENCM3_DESIG_H
#define LIBOPENCM3_DESIG_H
 
#include <libopencm3/cm3/common.h>
#include <libopencm3/stm32/memorymap.h>
 
/* --- Device Electronic Signature -------------------------------- */
 
BEGIN_DECLS
 
/**
 * Read the on board flash size
 * @return flash size in KB
 */
uint16_t desig_get_flash_size(void);
 
/**
 * Read the full 96 bit unique identifier
 * Note: ST specifies that bits 31..16 are _also_ reserved for future use
 * @param result pointer to at least 3xuint32_ts (96 bits)
 */
void desig_get_unique_id(uint32_t *result);
 
/**
 * Read the full 96 bit unique identifier and return it as a
 * zero-terminated string
 * @param string memory region to write the result to
 * @param string_len the size of string in bytes
 */
void desig_get_unique_id_as_string(char *string,
                                   unsigned int string_len);
 
/**
 * Generate the same serial number from the unique id registers as
 * the DFU bootloader.
 *
 * This document: http://www.usb.org/developers/docs/devclass_docs/usbmassbulk_10.pdf
 * says that the serial number has to be at least 12 digits long and that
 * the last 12 digits need to be unique. It also stipulates that the valid
 * character set is that of upper-case hexadecimal digits.
 * The onboard DFU bootloader produces a 12-digit serial based on the
 * 96-bit unique ID. Show the serial with ```dfu-util -l``` while the
 * MCU is in DFU mode.
 * @see https://my.st.com/52d187b7 for the algorithim used.
 * @param string pointer to store serial in, must be at least 13 bytes
 */
void desig_get_unique_id_as_dfu(char *string);
 
END_DECLS
 
#endif