libopencm3
A free/libre/open-source firmware library for various ARM Cortex-M3 microcontrollers.
tpiu.h
Go to the documentation of this file.
1
/*
2
* This file is part of the libopencm3 project.
3
*
4
* Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
5
*
6
* This library is free software: you can redistribute it and/or modify
7
* it under the terms of the GNU Lesser General Public License as published by
8
* the Free Software Foundation, either version 3 of the License, or
9
* (at your option) any later version.
10
*
11
* This library is distributed in the hope that it will be useful,
12
* but WITHOUT ANY WARRANTY; without even the implied warranty of
13
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14
* GNU Lesser General Public License for more details.
15
*
16
* You should have received a copy of the GNU Lesser General Public License
17
* along with this library. If not, see <http://www.gnu.org/licenses/>.
18
*/
19
20
#ifndef LIBOPENCM3_CM3_TPIU_H
21
#define LIBOPENCM3_CM3_TPIU_H
22
23
/**
24
* @defgroup cm_tpiu Cortex-M Trace Port Interface Unit (TPIU)
25
* @ingroup CM3_defines
26
* @{
27
*/
28
29
/* Those defined only on ARMv7 and above */
30
#if !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__)
31
#error "Trace Port Interface Unit not available in CM0"
32
#endif
33
34
/* --- TPIU registers ------------------------------------------------------ */
35
36
/* Supported Synchronous Port Size (TPIU_SSPSR) */
37
#define TPIU_SSPSR MMIO32(TPIU_BASE + 0x000)
38
39
/* Current Synchronous Port Size (TPIU_CSPSR) */
40
#define TPIU_CSPSR MMIO32(TPIU_BASE + 0x004)
41
42
/* Asynchronous Clock Prescaler (TPIU_ACPR) */
43
#define TPIU_ACPR MMIO32(TPIU_BASE + 0x010)
44
45
/* Selected Pin Protocol (TPIU_SPPR) */
46
#define TPIU_SPPR MMIO32(TPIU_BASE + 0x0F0)
47
48
/* Formatter and Flush Status Register (TPIU_FFSR) */
49
#define TPIU_FFSR MMIO32(TPIU_BASE + 0x300)
50
51
/* Formatter and Flush Control Register (TPIU_FFCR) */
52
#define TPIU_FFCR MMIO32(TPIU_BASE + 0x304)
53
54
/* (TPIU_DEVID) */
55
#define TPIU_DEVID MMIO32(TPIU_BASE + 0xFC8)
56
57
/* CoreSight Lock Status Register for this peripheral */
58
#define TPIU_LSR MMIO32(TPIU_BASE + CORESIGHT_LSR_OFFSET)
59
/* CoreSight Lock Access Register for this peripheral */
60
#define TPIU_LAR MMIO32(TPIU_BASE + CORESIGHT_LAR_OFFSET)
61
62
/* TODO: PID, CID */
63
64
/* --- TPIU_ACPR values ---------------------------------------------------- */
65
66
/* Bits 31:16 - Reserved */
67
/* Bits 15:0 - SWO output clock = Asynchronous_Reference_Clock/(value +1) */
68
69
/* --- TPIU_SPPR values ---------------------------------------------------- */
70
71
/* Bits 31:2 - Reserved */
72
#define TPIU_SPPR_SYNC (0x0)
73
#define TPIU_SPPR_ASYNC_MANCHESTER (0x1)
74
#define TPIU_SPPR_ASYNC_NRZ (0x2)
75
76
/* --- TPIU_FFSR values ---------------------------------------------------- */
77
78
/* Bits 31:4 - Reserved */
79
#define TPIU_FFSR_FTNONSTOP (1 << 3)
80
#define TPIU_FFSR_TCPRESENT (1 << 2)
81
#define TPIU_FFSR_FTSTOPPED (1 << 1)
82
#define TPIU_FFSR_FLINPROG (1 << 0)
83
84
/* --- TPIU_FFCR values ---------------------------------------------------- */
85
86
/* Bits 31:9 - Reserved */
87
#define TPIU_FFCR_TRIGIN (1 << 8)
88
/* Bits 7:2 - Reserved */
89
#define TPIU_FFCR_ENFCONT (1 << 1)
90
/* Bit 0 - Reserved */
91
92
/* --- TPIU_DEVID values ---------------------------------------------------- */
93
/* Bits 31:16 - Reserved */
94
/* Bits 15:12 - Implementation defined */
95
#define TPUI_DEVID_NRZ_SUPPORTED (1 << 11)
96
#define TPUI_DEVID_MANCHESTER_SUPPORTED (1 << 10)
97
/* Bit 9 - RAZ, indicated that trace data and clock are supported */
98
#define TPUI_DEVID_FIFO_SIZE_MASK (7 << 6)
99
/* Bits 5:0 - Implementation defined */
100
101
/**@}*/
102
103
#endif
include
libopencm3
cm3
tpiu.h
Generated on Tue Mar 7 2023 16:11:23 for libopencm3 by
1.9.4