libopencm3
A free/libre/open-source firmware library for various ARM Cortex-M3 microcontrollers.
rtc.h
Go to the documentation of this file.
1/* This provides unification of code over STM32 subfamilies */
2
3/*
4 * This file is part of the libopencm3 project.
5 *
6 * This library is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU Lesser General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
10 *
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU Lesser General Public License for more details.
15 *
16 * You should have received a copy of the GNU Lesser General Public License
17 * along with this library. If not, see <http://www.gnu.org/licenses/>.
18 */
19
22
23#if defined(STM32F0)
24# include <libopencm3/stm32/f0/rtc.h>
25#elif defined(STM32F1)
26# include <libopencm3/stm32/f1/rtc.h>
27#elif defined(STM32F2)
28# include <libopencm3/stm32/f2/rtc.h>
29#elif defined(STM32F3)
30# include <libopencm3/stm32/f3/rtc.h>
31#elif defined(STM32F4)
33#elif defined(STM32L0)
34# include <libopencm3/stm32/l0/rtc.h>
35#elif defined(STM32L1)
36# include <libopencm3/stm32/l1/rtc.h>
37#elif defined(STM32L4)
38# include <libopencm3/stm32/l4/rtc.h>
39#else
40# error "stm32 family not defined."
41#endif
42