usart_common_all.c

Go to the documentation of this file.

/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2013 Gareth McMullin <gareth@blacksphere.co.nz>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */
 
#include <libopencm3/sam/usart.h>
 
void usart_set_databits(uint32_t usart, int bits)
{
        USART_MR(usart) = (USART_MR(usart) & ~USART_MR_CHRL_MASK) |
                          ((bits - 5) << 6);
}
 
void usart_set_stopbits(uint32_t usart, enum usart_stopbits sb)
{
        USART_MR(usart) = (USART_MR(usart) & ~USART_MR_NBSTOP_MASK) |
                          (sb << 12);
}
 
void usart_set_parity(uint32_t usart, enum usart_parity par)
{
        USART_MR(usart) = (USART_MR(usart) & ~USART_MR_PAR_MASK) | (par << 9);
}
 
void usart_set_mode(uint32_t usart, enum usart_mode mode)
{
        USART_CR(usart) =
                (mode & USART_MODE_RX) ? USART_CR_RXEN : USART_CR_RXDIS;
        USART_CR(usart) = (mode & USART_MODE_TX) ? USART_CR_TXEN
                                                 : USART_CR_TXDIS;
}
 
void usart_set_flow_control(uint32_t usart, enum usart_flowcontrol fc)
{
        USART_MR(usart) = (USART_MR(usart) & ~USART_MR_MODE_MASK) |
                          (fc ? USART_MR_MODE_HW_HANDSHAKING : 0);
}
 
void usart_enable(uint32_t usart)
{
        USART_CR(usart) = USART_CR_TXEN | USART_CR_RXEN;
}
 
void usart_disable(uint32_t usart)
{
        USART_CR(usart) = USART_CR_TXDIS | USART_CR_RXDIS;
}
 
void usart_send(uint32_t usart, uint16_t data)
{
        USART_THR(usart) = data;
}
 
uint16_t usart_recv(uint32_t usart)
{
        return USART_RHR(usart) & 0x1f;
}
 
void usart_wait_send_ready(uint32_t usart)
{
        while ((USART_CSR(usart) & USART_CSR_TXRDY) == 0);
}
 
void usart_wait_recv_ready(uint32_t usart)
{
        while ((USART_CSR(usart) & USART_CSR_RXRDY) == 0);
}
 
void usart_send_blocking(uint32_t usart, uint16_t data)
{
        usart_wait_send_ready(usart);
        usart_send(usart, data);
}
 
uint16_t usart_recv_blocking(uint32_t usart)
{
        usart_wait_recv_ready(usart);
 
        return usart_recv(usart);
}
 
void usart_enable_rx_interrupt(uint32_t usart)
{
        USART_IER(usart) = USART_CSR_RXRDY;
}
 
void usart_disable_rx_interrupt(uint32_t usart)
{
        USART_IDR(usart) = USART_CSR_RXRDY;
}
 
void usart_wp_enable(uint32_t usart)
{
        USART_WPMR(usart) = USART_WPMR_KEY | USART_WPMR_WPEN;
}
 
void usart_wp_disable(uint32_t usart)
{
        USART_WPMR(usart) = USART_WPMR_KEY & (~USART_WPMR_WPEN);
}
 
void usart_select_clock(uint32_t usart, enum usart_clock clk)
{
        uint32_t reg_mr = USART_MR(usart) & (~USART_MR_USCLKS_MASK);
        USART_MR(usart) = ((clk << USART_MR_USCLKS_SHIFT) & USART_MR_USCLKS_MASK) | reg_mr;
}
 
void usart_set_character_length(uint32_t usart, enum usart_chrl chrl)
{
        uint32_t reg_mr = USART_MR(usart) & (~USART_MR_CHRL_MASK);
        USART_MR(usart) = reg_mr | (chrl << USART_MR_CHRL_SHIFT);
}