libopencm3
A free/libre/open-source firmware library for various ARM Cortex-M3 microcontrollers.

libopencm3 Cortex Nested Vectored Interrupt Controller More...

Collaboration diagram for NVIC:

Functions

void nvic_enable_irq (uint8_t irqn)
 NVIC Enable Interrupt. More...
 
void nvic_disable_irq (uint8_t irqn)
 NVIC Disable Interrupt. More...
 
uint8_t nvic_get_pending_irq (uint8_t irqn)
 NVIC Return Pending Interrupt. More...
 
void nvic_set_pending_irq (uint8_t irqn)
 NVIC Set Pending Interrupt. More...
 
void nvic_clear_pending_irq (uint8_t irqn)
 NVIC Clear Pending Interrupt. More...
 
uint8_t nvic_get_irq_enabled (uint8_t irqn)
 NVIC Return Enabled Interrupt. More...
 
void nvic_set_priority (uint8_t irqn, uint8_t priority)
 NVIC Set Interrupt Priority. More...
 

Detailed Description

libopencm3 Cortex Nested Vectored Interrupt Controller

Version
1.0.0
Author
© 2010 Thomas Otto tommi.nosp@m.@via.nosp@m.dmin..nosp@m.org
© 2012 Fergus Noble fergu.nosp@m.snob.nosp@m.le@gm.nosp@m.ail..nosp@m.com
Date
18 August 2012

Cortex processors provide 14 cortex-defined interrupts (NMI, usage faults, systicks etc.) and varying numbers of implementation defined interrupts (typically peripherial interrupts and DMA).

See also
Cortex-M3 Devices Generic User Guide
STM32F10xxx Cortex-M3 programming manual

LGPL License Terms libopencm3 License

Function Documentation

◆ nvic_clear_pending_irq()

void nvic_clear_pending_irq ( uint8_t  irqn)

NVIC Clear Pending Interrupt.

Force remove a user interrupt from a pending state. This has no effect if the interrupt is actively being serviced.

Parameters
[in]irqnUnsigned int8. Interrupt number User interrupts for STM32 F0 series

Definition at line 112 of file nvic.c.

References NVIC_ICPR.

◆ nvic_disable_irq()

void nvic_disable_irq ( uint8_t  irqn)

NVIC Disable Interrupt.

Disables a user interrupt.

Parameters
[in]irqnUnsigned int8. Interrupt number User interrupts for STM32 F0 series

Definition at line 70 of file nvic.c.

References NVIC_ICER.

◆ nvic_enable_irq()

void nvic_enable_irq ( uint8_t  irqn)

NVIC Enable Interrupt.

Enables a user interrupt.

Parameters
[in]irqnUnsigned int8. Interrupt number User interrupts for STM32 F0 series

Definition at line 57 of file nvic.c.

References NVIC_ISER.

◆ nvic_get_irq_enabled()

uint8_t nvic_get_irq_enabled ( uint8_t  irqn)

NVIC Return Enabled Interrupt.

Parameters
[in]irqnUnsigned int8. Interrupt number User interrupts for STM32 F0 series
Returns
Boolean. Interrupt enabled.

Definition at line 126 of file nvic.c.

References NVIC_ISER.

◆ nvic_get_pending_irq()

uint8_t nvic_get_pending_irq ( uint8_t  irqn)

NVIC Return Pending Interrupt.

True if the interrupt has occurred and is waiting for service.

Parameters
[in]irqnUnsigned int8. Interrupt number User interrupts for STM32 F0 series
Returns
Boolean. Interrupt pending.

Definition at line 84 of file nvic.c.

References NVIC_ISPR.

◆ nvic_set_pending_irq()

void nvic_set_pending_irq ( uint8_t  irqn)

NVIC Set Pending Interrupt.

Force a user interrupt to a pending state. This has no effect if the interrupt is already pending.

Parameters
[in]irqnUnsigned int8. Interrupt number User interrupts for STM32 F0 series

Definition at line 98 of file nvic.c.

References NVIC_ISPR.

◆ nvic_set_priority()

void nvic_set_priority ( uint8_t  irqn,
uint8_t  priority 
)

NVIC Set Interrupt Priority.

There are 4 priority levels only, given by the upper two bits of the priority byte, as required by ARM standards. No grouping available.

Parameters
[in]irqnInterrupt number User interrupts for STM32 F0 series
[in]priorityInterrupt priority (0 ... 255 in steps of 16)

Definition at line 152 of file nvic.c.

References NVIC_IPR32, NVIC_IRQ_COUNT, and SCB_SHPR32.