#include <libopencm3/cm3/assert.h>#include <libopencm3/gd32/rcc.h>#include <libopencm3/gd32/flash.h>
Include dependency graph for rcc.c:
Go to the source code of this file.
Functions | |
| void | rcc_osc_ready_int_clear (enum rcc_osc osc) |
| RCC Clear the Oscillator Ready Interrupt Flag. More... | |
| void | rcc_osc_ready_int_enable (enum rcc_osc osc) |
| RCC Enable the Oscillator Ready Interrupt. More... | |
| void | rcc_osc_ready_int_disable (enum rcc_osc osc) |
| RCC Disable the Oscillator Ready Interrupt. More... | |
| int | rcc_osc_ready_int_flag (enum rcc_osc osc) |
| RCC Read the Oscillator Ready Interrupt Flag. More... | |
| void | rcc_css_int_clear (void) |
| RCC Clear the Clock Security System Interrupt Flag. More... | |
| int | rcc_css_int_flag (void) |
| RCC Read the Clock Security System Interrupt Flag. More... | |
| void | rcc_wait_for_osc_ready (enum rcc_osc osc) |
| RCC Wait for Oscillator Ready. More... | |
| void | rcc_osc_on (enum rcc_osc osc) |
| RCC Turn on an Oscillator. More... | |
| void | rcc_osc_off (enum rcc_osc osc) |
| RCC Turn off an Oscillator. More... | |
| void | rcc_css_enable (void) |
| RCC Enable the Clock Security System. More... | |
| void | rcc_css_disable (void) |
| RCC Disable the Clock Security System. More... | |
| void | rcc_set_sysclk_source (uint32_t clk) |
| RCC Set the Source for the System Clock. More... | |
| void | rcc_set_pll_multiplication_factor (uint32_t mul) |
| RCC Set the PLL Multiplication Factor. More... | |
| void | rcc_set_pll_source (uint32_t pllsrc) |
| RCC Set the PLL Clock Source. More... | |
| void | rcc_set_pllxtpre (uint32_t pllxtpre) |
| RCC Set the HSE Frequency Divider used as PLL Clock Source. More... | |
| uint32_t | rcc_rtc_clock_enabled_flag (void) |
| RCC RTC Clock Enabled Flag. More... | |
| void | rcc_enable_rtc_clock (void) |
| RCC Enable the RTC clock. More... | |
| void | rcc_set_rtc_clock_source (enum rcc_osc clock_source) |
| RCC Set the Source for the RTC clock. More... | |
| void | rcc_set_adcpre (uint32_t adcpre) |
| ADC Setup the A/D Clock. More... | |
| void | rcc_set_ppre2 (uint32_t ppre2) |
| RCC Set the APB2 Prescale Factor. More... | |
| void | rcc_set_ppre1 (uint32_t ppre1) |
| RCC Set the APB1 Prescale Factor. More... | |
| void | rcc_set_hpre (uint32_t hpre) |
| RCC Set the AHB Prescale Factor. More... | |
| void | rcc_set_usbpre (uint32_t usbpre) |
| RCC Set the USB Prescale Factor. More... | |
| void | rcc_set_prediv (uint32_t prediv) |
| uint32_t | rcc_system_clock_source (void) |
| RCC Get the System Clock Source. More... | |
| void | rcc_clock_setup_pll (const struct rcc_clock_scale *clock) |
| Setup clocks to run from PLL. More... | |
| void | rcc_backupdomain_reset (void) |
| RCC Reset the Backup Domain. More... | |
Variables | |
| uint32_t | rcc_apb1_frequency = 8000000 |
| Set the default clock frequencies. More... | |
| uint32_t | rcc_apb2_frequency = 8000000 |
| uint32_t | rcc_ahb_frequency = 8000000 |
| const struct rcc_clock_scale | rcc_hsi_configs [] |
| const struct rcc_clock_scale | rcc_hse8_configs [] |
