#include <libopencm3/stm32/rcc.h>#include <libopencm3/stm32/pwr.h>#include <libopencm3/stm32/flash.h>#include <libopencm3/cm3/assert.h>
Include dependency graph for rcc.c:
Go to the source code of this file.
Functions | |
| void | rcc_osc_on (enum rcc_osc osc) |
| void | rcc_osc_off (enum rcc_osc osc) |
| bool | rcc_is_osc_ready (enum rcc_osc osc) |
| Is the given oscillator ready? More... | |
| void | rcc_wait_for_osc_ready (enum rcc_osc osc) |
| Wait for Oscillator Ready. More... | |
| void | rcc_css_enable (void) |
| void | rcc_css_disable (void) |
| void | rcc_css_int_clear (void) |
| int | rcc_css_int_flag (void) |
| void | rcc_set_sysclk_source (enum rcc_osc osc) |
| Set the Source for the System Clock. More... | |
| enum rcc_osc | rcc_system_clock_source (void) |
| Return the clock source which is used as system clock. More... | |
| void | rcc_wait_for_sysclk_status (enum rcc_osc osc) |
| Wait until system clock switched to given oscillator. More... | |
| void | rcc_set_pll_source (uint32_t pllsrc) |
| Configure pll source. More... | |
| void | rcc_set_main_pll (uint32_t source, uint32_t pllm, uint32_t plln, uint32_t pllp, uint32_t pllq, uint32_t pllr) |
| Configure pll source and output frequencies. More... | |
| void | rcc_enable_pllp (bool enable) |
| Enable PLL P clock output. More... | |
| void | rcc_enable_pllq (bool enable) |
| Enable PLL Q clock output. More... | |
| void | rcc_enable_pllr (bool enable) |
| Enable PLL R clock output. More... | |
| void | rcc_set_ppre (uint32_t ppre) |
| Configure APB peripheral clock prescaler. More... | |
| void | rcc_set_hpre (uint32_t hpre) |
| Configure AHB peripheral clock prescaler. More... | |
| void | rcc_set_hsisys_div (uint32_t hsidiv) |
| Configure HSI16 clock division factor to feed SYSCLK. More... | |
| void | rcc_set_mcopre (uint32_t mcopre) |
| Configure mco prescaler. More... | |
| void | rcc_clock_setup (const struct rcc_clock_scale *clock) |
| Setup sysclock with desired source (HSE/HSI/PLL/LSE/LSI). More... | |
| void | rcc_set_rng_clk_div (uint32_t rng_div) |
| Setup RNG Peripheral Clock Divider. More... | |
| void | rcc_set_peripheral_clk_sel (uint32_t periph, uint32_t sel) |
| Set the peripheral clock source. More... | |
| static uint32_t | rcc_get_clksel_freq (uint8_t shift) |
| uint32_t | rcc_get_usart_clk_freq (uint32_t usart) |
| Get the peripheral clock speed for the USART at base specified. More... | |
| uint32_t | rcc_get_timer_clk_freq (uint32_t timer) |
| Get the peripheral clock speed for the Timer at base specified. More... | |
| uint32_t | rcc_get_i2c_clk_freq (uint32_t i2c) |
| Get the peripheral clock speed for the I2C device at base specified. More... | |
| uint32_t | rcc_get_spi_clk_freq (uint32_t spi) |
| Get the peripheral clock speed for the SPI device at base specified. More... | |
Variables | |
| uint32_t | rcc_ahb_frequency = 16000000 |
| uint32_t | rcc_apb1_frequency = 16000000 |
| const struct rcc_clock_scale | rcc_clock_config [RCC_CLOCK_CONFIG_END] |
