radio_common.c File Reference
Include dependency graph for radio_common.c:
Go to the source code of this file.
Functions | |
| void | radio_set_txpower (enum radio_txpower txpower) |
| Set radio transmission power. More... | |
| void | radio_set_lsbfirst (void) |
| Set bit transmission order to LSB first. More... | |
| void | radio_set_msbfirst (void) |
| Set bit transmission order to MSB first. More... | |
| void | radio_enable_whitening (void) |
| Enable on the air data whitening. More... | |
| void | radio_disable_whitening (void) |
| Disable on the air data whitening. More... | |
| void | radio_set_crclen (uint8_t crc_len) |
| Set CRC length in number of bytes. More... | |
| void | radio_disable_crc (void) |
| Disable CRC calculation. More... | |
| void | radio_enable (void) |
| Enable the peripheral. More... | |
| void | radio_disable (void) |
| Disable the peripheral. More... | |
| void | radio_set_balen (uint8_t ba_len) |
| Set Base Address length. More... | |
| void | radio_set_maxlen (uint8_t maxlen) |
| Set maximum transmission length in number of bytes. More... | |
| void | radio_set_crc_skipaddr (bool is_skip_addr) |
| Exclude access address from CRC calculation. More... | |
| void | radio_configure_ble (void) |
| Configure the radio to be used in BLE mode. More... | |
| void | radio_configure_packet (uint8_t lf_len_bits, uint8_t s0_len_bytes, uint8_t s1_len_bits) |
| Configure the packet. More... | |
| void | radio_set_frequency (uint8_t freq) |
| Set radio frequency. More... | |
| void | radio_set_datawhiteiv (uint8_t iv) |
| Set Data Whitening Initialization Vector. More... | |
| void | radio_set_addr (uint8_t addr_index, uint32_t base, uint8_t prefix) |
| void | radio_set_tx_address (uint8_t addr_index) |
| void | radio_set_packet_ptr (uint8_t *packet_ptr) |
| void | radio_enable_tx (void) |
| void | radio_enable_rx (void) |
