#include <libopencm3/stm32/adc.h>

Include dependency graph for adc_common_v2.c:

Functions
bool	adc_eoc (uint32_t adc)
	ADC Read the End-of-Conversion Flag. More...

bool	adc_eos (uint32_t adc)
	ADC Read the End-of-Sequence Flag for Regular Conversions. More...

void	adc_power_on_async (uint32_t adc)
	Turn on the ADC (async) More...

bool	adc_is_power_on (uint32_t adc)
	Is the ADC powered up and ready? More...

void	adc_power_on (uint32_t adc)
	Turn on the ADC. More...

void	adc_power_off_async (uint32_t adc)
	Turn off the ADC (async) This will actually block if it needs to turn off a currently running conversion, as per ref man. More...

bool	adc_is_power_off (uint32_t adc)
	Is the ADC powered down? More...

void	adc_power_off (uint32_t adc)
	Turn off the ADC This will actually block if it needs to turn off a currently running conversion, as per ref man. More...

void	adc_calibrate_async (uint32_t adc)
	Start the ADC calibration and immediately return. More...

bool	adc_is_calibrating (uint32_t adc)
	Is the ADC Calibrating? More...

void	adc_calibrate (uint32_t adc)
	Start ADC calibration and wait for it to finish. More...

void	adc_set_continuous_conversion_mode (uint32_t adc)
	Enable Continuous Conversion Mode In this mode the ADC starts a new conversion of a single channel or a channel group immediately following completion of the previous channel group conversion. More...

void	adc_set_single_conversion_mode (uint32_t adc)
	Enable Single Conversion Mode In this mode the ADC performs a conversion of one channel or a channel group and stops. More...

void	adc_set_resolution (uint32_t adc, uint16_t resolution)
	ADC Set Resolution. More...

void	adc_set_left_aligned (uint32_t adc)
	ADC Set the Data as Left Aligned. More...

void	adc_set_right_aligned (uint32_t adc)
	ADC Set the Data as Right Aligned. More...

void	adc_enable_dma (uint32_t adc)
	ADC Enable DMA Transfers. More...

void	adc_disable_dma (uint32_t adc)
	ADC Disable DMA Transfers. More...

void	adc_enable_overrun_interrupt (uint32_t adc)
	ADC Enable the Overrun Interrupt. More...

void	adc_disable_overrun_interrupt (uint32_t adc)
	ADC Disable the Overrun Interrupt. More...

bool	adc_get_overrun_flag (uint32_t adc)
	ADC Read the Overrun Flag. More...

void	adc_clear_overrun_flag (uint32_t adc)
	ADC Clear Overrun Flags. More...

void	adc_enable_eoc_interrupt (uint32_t adc)
	ADC Enable Regular End-Of-Conversion Interrupt. More...

void	adc_disable_eoc_interrupt (uint32_t adc)
	ADC Disable Regular End-Of-Conversion Interrupt. More...

uint32_t	adc_read_regular (uint32_t adc)
	ADC Read from the Regular Conversion Result Register. More...

void	adc_enable_temperature_sensor (void)
	Enable the temperature sensor (only) The channel this is available on is unfortunately not consistent, even though the bit used to enable it is. More...

void	adc_disable_temperature_sensor (void)
	Disable the temperature sensor (only) More...

void	adc_enable_vrefint (void)
	Enable the internal voltage reference (only) The channel this is available on is unfortunately not consistent, even though the bit used to enable it is. More...

void	adc_disable_vrefint (void)
	Disable the internal voltage reference (only) More...

void	adc_start_conversion_regular (uint32_t adc)
	ADC Software Triggered Conversion on Regular Channels. More...

void	adc_enable_dma_circular_mode (uint32_t adc)
	Enable circular mode for DMA transfers. More...

void	adc_disable_dma_circular_mode (uint32_t adc)
	Disable circular mode for DMA transfers. More...

void	adc_enable_delayed_conversion_mode (uint32_t adc)
	Enable Delayed Conversion Mode. More...

void	adc_disable_delayed_conversion_mode (uint32_t adc)
	Enable Delayed Conversion Mode. More...

Functions