#include <libopencm3/cm3/common.h>
#include <libopencm3/nrf/memorymap.h>
#include <libopencm3/nrf/periph.h>

Include dependency graph for common/uart.h:

This graph shows which files directly or indirectly include this file:

Macros
#define	UART0 UART0_BASE

#define	UART_TASK_STARTRX(uart) MMIO32((uart) + 0x000)

#define	UART_TASK_STOPRX(uart) MMIO32((uart) + 0x004)

#define	UART_TASK_STARTTX(uart) MMIO32((uart) + 0x008)

#define	UART_TASK_STOPTX(uart) MMIO32((uart) + 0x00C)

#define	UART_TASK_SUSPEND(uart) MMIO32((uart) + 0x01C)

#define	UART_EVENT_CTS(uart) MMIO32((uart) + 0x100)

#define	UART_EVENT_NCTS(uart) MMIO32((uart) + 0x104)

#define	UART_EVENT_RXDRDY(uart) MMIO32((uart) + 0x108)

#define	UART_EVENT_TXDRDY(uart) MMIO32((uart) + 0x11C)

#define	UART_EVENT_ERROR(uart) MMIO32((uart) + 0x124)

#define	UART_EVENT_RXTO(uart) MMIO32((uart) + 0x144)

#define	UART_INTEN(uart) _PERIPH_INTEN(uart)

#define	UART_INTENSET(uart) _PERIPH_INTENSET(uart)

#define	UART_INTENCLR(uart) _PERIPH_INTENCLR(uart)

#define	UART_ERRORSRC(uart) MMIO32((uart) + 0x480)

#define	UART_ENABLE(uart) MMIO32((uart) + 0x500)

#define	UART_PSELRTS(uart) MMIO32((uart) + 0x508)

#define	UART_PSELTXD(uart) MMIO32((uart) + 0x50C)

#define	UART_PSELCTS(uart) MMIO32((uart) + 0x510)

#define	UART_PSELRXD(uart) MMIO32((uart) + 0x514)

#define	UART_RXD(uart) MMIO32((uart) + 0x518)

#define	UART_TXD(uart) MMIO32((uart) + 0x51C)

#define	UART_BAUDRATE(uart) MMIO32((uart) + 0x524)

#define	UART_CONFIG(uart) MMIO32((uart) + 0x56C)

#define	UART_INTEN_CTS (1 << 0)

#define	UART_INTEN_NCTS (1 << 1)

#define	UART_INTEN_RXDRDY (1 << 2)

#define	UART_INTEN_TXDRDY (1 << 7)

#define	UART_INTEN_ERROR (1 << 9)

#define	UART_INTEN_RXTO (1 << 17)

#define	UART_ERRORSRC_OVERRUN (1 << 0)

#define	UART_ERRORSRC_PARITY (1 << 1)

#define	UART_ERRORSRC_FRAMING (1 << 2)

#define	UART_ERRORSRC_BREAK (1 << 3)

#define	UART_ENABLE_ENABLED (4)

#define	UART_ENABLE_DISABLED (0)

#define	UART_CONFIG_HWFC (1)

#define	UART_CONFIG_PARITY (7 << 1)

#define	UART_PSEL_OFF (0xff)

#define	UART_MAX_PIN (31)

#define	UART_PSEL_VAL(p) (p <= UART_MAX_PIN ? (uint32_t) p : 0xffffffff)

Enumerations
enum	uart_baud { UART_BAUD_1200 = 0x0004F000 , UART_BAUD_2400 = 0x0009D000 , UART_BAUD_4800 = 0x0013B000 , UART_BAUD_9600 = 0x00275000 , UART_BAUD_14400 = 0x003B0000 , UART_BAUD_19200 = 0x004EA000 , UART_BAUD_28800 = 0x0075F000 , UART_BAUD_38400 = 0x009D5000 , UART_BAUD_57600 = 0x00EBF000 , UART_BAUD_76800 = 0x013A9000 , UART_BAUD_115200 = 0x01D7E000 , UART_BAUD_230400 = 0x03AFB000 , UART_BAUD_250000 = 0x04000000 , UART_BAUD_460800 = 0x075F7000 , UART_BAUD_921600 = 0x0EBEDFA4 , UART_BAUD_1M = 0x10000000 }

Functions
void	uart_enable (uint32_t uart)
	Enable the peripheral. More...

void	uart_disable (uint32_t uart)
	Disable the peripheral. More...

void	uart_configure (uint32_t uart, uint32_t txd, uint32_t rxd, uint32_t rts, uint32_t cts, enum uart_baud br, bool enable_parity)
	Configure UART parameters in single call. More...

void	uart_set_baudrate (uint32_t uart, enum uart_baud br)

void	uart_set_parity (uint32_t uart, int parity)

void	uart_set_flow_control (uint32_t uart, int flow)

void	uart_send_stop (uint32_t uart)

void	uart_start_tx (uint32_t uart)

void	uart_stop_tx (uint32_t uart)

void	uart_send (uint32_t uart, uint16_t byte)

void	uart_start_rx (uint32_t uart)

void	uart_stop_rx (uint32_t uart)

uint16_t	uart_recv (uint32_t uart)

void	uart_set_pins (uint32_t uart, uint32_t rx, uint32_t tx, uint32_t cts, uint32_t rts)
	Select GPIO pins to be used by this peripheral. More...

Macros

Enumerations

Functions